Vehicle Telematics Computer
The VTC Series, an innovative series of in-vehicle computer, is designed for in-vehicle operation within trucks, buses, trains and marine vehicles. NEXCOM's compact in-vehicle computers and transportation computers are differentiated by a multitude of I/O interfaces which enable connectivity to various in-vehicle features and meet arbitrary application requirements.
First Response Vehicles > MVS 2620-IP
MVS 2620-IP, an IP65-rated rugged enclosure, maintenance-free box computer, is ideal for data acquisition in extreme environments throughout a number of in-vehicle applications, like transportation, heavy duty and waste management, etc. All external interfaces, including Gigabit Ethernet, isolated CAN bus and digit I/O, USB, and RS232/485 serial ports, are implemented on IP67-proof connectors for reliable data transmission in harsh and rugged environments.
MVS 2620-IP is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for quickly tailored to a vast number of applications. Inside the system, there’re four mini-PCIe slots with three SIM card slots offering WLAN, 3G/LTE, CAN OBD (SAE J1708/J1939) or CVBS functionality. Besides, it can operate at temperatures from -30°C to +70°C under fanless.
MVS 2620-IP supports 9~36VDC power input with ignition managemnt and 12VDC at 2A maximun power output. It is compliant to E-mark and ISO 7637-2 in vehicle certificate and meet US military MIL-STD-810G, category 4, composite wheeled vehicle, for vibration and shock criteria.
MVS 2620-IP
In-Vehicle IP65-rated Box Computer- Main Feature
- IP65-rated rugged design
- Intel Atom® x7, 4c, 2.0GHz E3950 (Apollo-lake)
- 9~36VDC with ignition control
- Built-in GPS with optional dead reckoning
- Up to two WLAN or two 3G/LTE via 3 mini-PCIe slots
- Electrical isolation for CAN 2.0B & GPI/O
- Optional OBD function (SAE J1939/J1708)
- Rich and various GbE, USB 2.0, serial I/O and storages
- Compliant to E-mark and ISO 7637-2
- Compliant to MIL-STD-810G in vibration/shock
| CPU | Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake) |
| Memory | 204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, 4GB industrial grade memory in default |
| Storage | 1 x 2.5" SATA 3.0 SSD/HDD1 x CFast (externally acessible) |
| GPS and On Board Sensor | 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/BeidouOptional modules with Dead Reckoning availableBuilt-in G-sensor |
| Ethernet | 2-port 10/100/1000 MbpsController: Intel® 1210-T1 |
| Security | TPM in option |
| I/O Interface-Front | 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health1 x USB type A USB 2.0 port (w/ lid)1 x SIM slot (w/ lid)1 x Mic-in, 1 x Line-out, power & reset buttons for M12 connector3 x antenna holes for WWAN/GPSOne expansion port (M12-type) reserved |
| I/O Interface-Rear | Circular 22-pin: - 3x RS-232 (two for full, RI/5V/12V selectable)M12 8-pin: - 1 x GbEM12 8-pin: - 2 x USB 2.0M12 12-pin: - 3-bit GPO & 3-bit GPI - iButtonM12 12-pin: - 1 x Line-out - DC12V-out, 2A max. - OBD from optional VIOB-CAN-05/06 module (SAE J1708/J1939) - 2 x CAN Bus 2.0B from optional VIOB-CAN-04 moduleCircular 31-pin: - 1 x VGA, resolution up to 2560 x 1600 @60Hz - 1 x GbE - 2 x RS-485 (2-wire) - 1 x CAN 2.0B w/ isolation6-bit DIP switch (w/ lid) 3 x Digital inputs - Source-type: 9~36V-in (default) -Eexternal-type: 0~33VDC pull-high -Isolation 3 x Digital outputs - Source-type: 9~36V-in (norminal 35mA@24V) (default) - External 5~27VDC pull-high, sink current: typical 220mA for each bit, 500mA max (@25°C) - Isolation Source or external selected by 6-bit DIP Switch1 x SIM card socket (w/ lid) and 1x internal SIM card socket selectable4 x antenna holes for WLAN/WWAN1 x M12 S-code for 9~36VDC-IN |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode |
| Operating System | Windows 10 64-bit only, Linux YOCTO |
| Dimensions | 260mm (W) x 198mm (D) x 50mm (H) (10.24" x 7.80" x 1.97")2.88kg |
| Environment | Operating temperatures: -30°C~70°C (w/ industrial SSD) with air flowStorage temperatures: -40°C~80°CRelative humidity: 10% to 90% (non-condensing)Vibration (random): - 1.2g@5~500 Hz (in operation, HDD), 2.5g@5~500 Hz (in operation, SSD)Vibration (SSD): - Operating: MIL-STD-810G, 514.6C, Category 4 - Storage: MIL-STD-810G, 514.6, Category 24, minimum integrity testShock (SSD/HDD): - Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g - Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
| Certifications | CE approval, FCC Class A, E13 |
Public Transit / Public Works > MVS 2620-IP
MVS 2620-IP, an IP65-rated rugged enclosure, maintenance-free box computer, is ideal for data acquisition in extreme environments throughout a number of in-vehicle applications, like transportation, heavy duty and waste management, etc. All external interfaces, including Gigabit Ethernet, isolated CAN bus and digit I/O, USB, and RS232/485 serial ports, are implemented on IP67-proof connectors for reliable data transmission in harsh and rugged environments.
MVS 2620-IP is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for quickly tailored to a vast number of applications. Inside the system, there’re four mini-PCIe slots with three SIM card slots offering WLAN, 3G/LTE, CAN OBD (SAE J1708/J1939) or CVBS functionality. Besides, it can operate at temperatures from -30°C to +70°C under fanless.
MVS 2620-IP supports 9~36VDC power input with ignition managemnt and 12VDC at 2A maximun power output. It is compliant to E-mark and ISO 7637-2 in vehicle certificate and meet US military MIL-STD-810G, category 4, composite wheeled vehicle, for vibration and shock criteria.
MVS 2620-IP
In-Vehicle IP65-rated Box Computer- Main Feature
- IP65-rated rugged design
- Intel Atom® x7, 4c, 2.0GHz E3950 (Apollo-lake)
- 9~36VDC with ignition control
- Built-in GPS with optional dead reckoning
- Up to two WLAN or two 3G/LTE via 3 mini-PCIe slots
- Electrical isolation for CAN 2.0B & GPI/O
- Optional OBD function (SAE J1939/J1708)
- Rich and various GbE, USB 2.0, serial I/O and storages
- Compliant to E-mark and ISO 7637-2
- Compliant to MIL-STD-810G in vibration/shock
| CPU | Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake) |
| Memory | 204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, 4GB industrial grade memory in default |
| Storage | 1 x 2.5" SATA 3.0 SSD/HDD1 x CFast (externally acessible) |
| GPS and On Board Sensor | 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/BeidouOptional modules with Dead Reckoning availableBuilt-in G-sensor |
| Ethernet | 2-port 10/100/1000 MbpsController: Intel® 1210-T1 |
| Security | TPM in option |
| I/O Interface-Front | 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health1 x USB type A USB 2.0 port (w/ lid)1 x SIM slot (w/ lid)1 x Mic-in, 1 x Line-out, power & reset buttons for M12 connector3 x antenna holes for WWAN/GPSOne expansion port (M12-type) reserved |
| I/O Interface-Rear | Circular 22-pin: - 3x RS-232 (two for full, RI/5V/12V selectable)M12 8-pin: - 1 x GbEM12 8-pin: - 2 x USB 2.0M12 12-pin: - 3-bit GPO & 3-bit GPI - iButtonM12 12-pin: - 1 x Line-out - DC12V-out, 2A max. - OBD from optional VIOB-CAN-05/06 module (SAE J1708/J1939) - 2 x CAN Bus 2.0B from optional VIOB-CAN-04 moduleCircular 31-pin: - 1 x VGA, resolution up to 2560 x 1600 @60Hz - 1 x GbE - 2 x RS-485 (2-wire) - 1 x CAN 2.0B w/ isolation6-bit DIP switch (w/ lid) 3 x Digital inputs - Source-type: 9~36V-in (default) -Eexternal-type: 0~33VDC pull-high -Isolation 3 x Digital outputs - Source-type: 9~36V-in (norminal 35mA@24V) (default) - External 5~27VDC pull-high, sink current: typical 220mA for each bit, 500mA max (@25°C) - Isolation Source or external selected by 6-bit DIP Switch1 x SIM card socket (w/ lid) and 1x internal SIM card socket selectable4 x antenna holes for WLAN/WWAN1 x M12 S-code for 9~36VDC-IN |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode |
| Operating System | Windows 10 64-bit only, Linux YOCTO |
| Dimensions | 260mm (W) x 198mm (D) x 50mm (H) (10.24" x 7.80" x 1.97")2.88kg |
| Environment | Operating temperatures: -30°C~70°C (w/ industrial SSD) with air flowStorage temperatures: -40°C~80°CRelative humidity: 10% to 90% (non-condensing)Vibration (random): - 1.2g@5~500 Hz (in operation, HDD), 2.5g@5~500 Hz (in operation, SSD)Vibration (SSD): - Operating: MIL-STD-810G, 514.6C, Category 4 - Storage: MIL-STD-810G, 514.6, Category 24, minimum integrity testShock (SSD/HDD): - Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g - Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
| Certifications | CE approval, FCC Class A, E13 |
Security > MVS 5603-C6SMK
MVS 5603-C6SMK 6-CH PoE In-vehicle mobile computer increases safety and security for bus passenger transportation with high video resolution and 2 removable extensive HDD/SSD and CFast for storage capacity. It connects up to 6 IP cameras + PoE function providing reliable and high quality video coverage around the bus.
MVS 5603-C6SMK is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for different applications.
MVS 5603-C6SMK leverages wireless networks to simplify fleet management with capabilities such as remote, real-time video monitoring. This remote capability keeps transit fleets in service around the clock.
Vehicle data integration and diagnostics are also carried out via CAN Bus and OBDII. MIL-STD-810G for shock and vibration is designed to operate in harsh environments. Optional internal back-up battery guards against any unexpected vehicle power failure or unstable vehicle power.
MVS 5603-C6SMK
6-CH PoE In-vehicle Mobile Computer- Main Feature
- Modular design for flexible I/O expansion
- WLAN, 3G/LTE via 3 mini-PCIe + 1 M.2 slots
- Up to five SIM cards + triple WWAN modules support
- 6 x GbE 802.3 af/at PoE, 6 x M12 ports
- Built-in u-blox NEO-M8N module, optional Dead Reckoning support
- Intel® Core™ dual core i7-6600U/i3-6100U Dual removable SATA 3.0 2.5" SSD/HDD
- iButton for driver ID identification
- Built-in CAN 2.0B. Optional OBDII function (SAE J1939/J1708)
- Pattern number M531607 registered, an easy way to expand diverse I/O cards
| CPU | 6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U, 2.3GHz |
| Memory | 2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory |
| Storage | 2 x 2.5” SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0, 1 supported (optional lockable storage available) 1 x CFast (externally accessible) |
| Expansion | 1 x full size mini-PCIe socket (USB 2.0)1 x full size mini-PCIe socket (USB 2.0 + PCIe)1 x half size mini-PCIe socket (USB 2.0 + PCIe)1 x M.2 B-key (3042)1 x full size mini-PCIe socket (USB 2.0) |
| GNSS and On Board Sensor | 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/BeidouOptional modules with Dead Reckoning availableBuilt-in G-senso |
| Power over Ethernet | 6-port M12 for 10/100/1000 Mbps PoE IEEE 802.3af/at conformity, total 60W PSE |
| Security | TPM in option |
| I/O Interface-Front | 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health1 x Reset button2 x USB type A USB3.0 port2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out1 x externally accessible SIM card socket2 x antenna holes for WWAN/WLAN/BT/GPS |
| I/O Interface-Rear | 6 x M12 10/100/1000 Mbps PoE ports with LED2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED1 x 9~36VDC input with ignition and 40W typical power consumption2 x USB type A USB 3.0 port2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz1 x HDMI port, resolution up to 2560 x 1600 @60Hz2 x DB-9 RS-2321 x DB-9 RS-232/422/485 (RI/5V/12V selectable)1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button1 x DB9 connector for optional DR signal input, 2 x MDO and iButton1 x 16-pin terminal block connector 1 x CAN Bus 2.0B (on board) 1 x OBDII from optional VIOB-CAN-03 module (SAE J1939) 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module 8 x programmable GPIO (4 x Digital inputs in default) -Input voltage (source type): 5VDC TTL (default) -Input voltage (external type): 3 ~ 12VDC (4 x Digital outputs in default) -Digital output (source type): 5VDC TTL (default), max current: 20mA -Digital output (external type): 3 ~ 24VDC, max current: 150mA1 x externally acessible SIM card socket and 1x internal SIM card socket selectable |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode |
| Rechargeable Battery (option) | Lithium-ion PolymerNominal capacity 1100mAhMaximum charge current 1.0CmA |
| Operating System | Windows 7/WES7/Windows 8/WES8/Windows 10/Linux kernel 3.X |
| Dimensions | 260mm (W) x 196mm (D) x 91mm (H) (10.24” x 7.72” x 3.58”)4kg |
| Environment | Operating temperatures: -30°C~60°C (w/ industrial SSD) with air flowStorage temperatures: -40°C~80°CRelative humidity: 10% to 90% (non-condensing)Vibration (random): 1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD)Vibration (SSD): Operating: MIL-STD-810G, Method 514.6C, Procedure 1, Category 4, common carrier US highway truck vibration exposure Storage: MIL-STD-810G, Method 514.6E, Procedure 1, Category 24, minimum integrity testShock (SSD/HDD): Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g (HDD); functional shock=40g (SSD) Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
| Certifications | CE approval, FCC Class A, E13 Mark |
